Cirrus SR22 Starlink Mount V3
Removable aftermarket accessory. It clamps onto the upper luggage bracket through molded rubber supports, and a bolt passes through the bracket's already-open hook-strap hole — a hole that carries nothing in the stock configuration. Nothing on the aircraft is removed, replaced, drilled or modified, and the luggage net stays in place.
Confirm your airframe
Compatible with select Cirrus SR20, SR22, and SR22T configurations. Generation determines whether you need the cargo net brackets.
Ask about my aircraft →Will it hold up?
The three things every pilot asks about a printed accessory in a cockpit, answered directly.
Rated well past a hot cockpit
Printed in heat-resistant filament with a deflection temperature above 210°F — far beyond what a closed cockpit reaches on a Texas ramp in August. Ours has lived through it year-round.
Clamps on, nothing removed
The mount clamps onto the upper luggage bracket through molded rubber supports rather than resting loose, so it doesn't walk under engine and airframe vibration. A bolt passes through the bracket's already-open hook-strap hole, which carries nothing in the stock configuration.
Metal where the load is
The supporting plate is 6061-T6 aluminum. The printed geometry handles fit and alignment; the metal carries the load.
Starlink Mount V3
Easy Setup
Custom-fit design allows for quick, hassle-free setup. The luggage net does not need to be removed.
Enhanced Connectivity
Holds your Starlink Mini securely positioned for maximum signal reliability, while still keeping the tail section visible.
Silent & Vibration Free
Molded rubber supports deliver a quiet, vibration-free ride through flight and taxi.
High-Quality 3D Print
Printed in durable, heat-resistant material rated above 210°F for long-lasting performance.
Simple & Secure Mount
Designed for ease of use and secure attachment inside the SR20 and SR22 luggage compartment. Before each flight, verify that the mount and attached equipment are secure and do not interfere with flight controls, required visibility, emergency egress, or operation of aircraft systems.
Carbon Fiber Legs
Stiff, lightweight tubes brace the mount against the baggage floor with no drilling or permanent changes.
- Mounting plate
- 6061-T6 aluminum
- Heat rating
- Above 210°F
- Setup time
- Under 5 minutes
- Fitment
- 3D-scanned, exact
Five minutes, one wrench, no drilling
Mounts in Cirrus aircraft today, across SR20, SR22, and SR22T airframes — plus the one in ours, which is where every change starts.
Questions
Send your model, generation, and a photo of your pole mount — we'll confirm fit before you spend anything.
Look at the clamp body. The -501 (new style) has a squarer collar; the -515 (old style) is rounder with a visible seam. The photos in the selector above show both. If you're still unsure, send us a photo and we'll identify it — that's faster than an exchange.
1.66 lb as mounted, including the 6061-T6 aluminum plate.
No. The mount clamps onto the upper luggage bracket with the net in place. Do let us know if the inertia reels have been removed from your aircraft.
No. The mount is positioned to retain visibility of the tail section through the rear window while keeping the Starlink Mini aligned for satellite coverage.
Cirrus3DPrints does not represent this product as an FAA-approved, FAA-certified, OEM-approved, or certified aircraft component. It is sold as an aftermarket accessory for mounting portable equipment. Whether its use is appropriate for a particular aircraft and operation is the responsibility of the aircraft owner/operator and pilot in command, in consultation with an appropriately qualified mechanic or other aviation professional when appropriate.
We replace it free. Send your model, generation, and photos and we'll make it right. The one exception is choosing the wrong pole mount style — that's why we moved the comparison photos into the selector.
Lead time is currently 1–2 business days. You'll get an estimated ship date within 24–48 hours of ordering, and tracking when it leaves.
Removable Starlink Mini mounting accessory designed for use with compatible Cirrus SR20, SR22, and SR22T aircraft. It clamps onto the upper luggage bracket through molded rubber supports, and a bolt passes through the bracket's already-open hook-strap hole, which carries nothing in the stock configuration. It requires no drilling, cutting or permanent modification, and does not remove or replace any original Cirrus component. Cirrus3DPrints does not represent it as an FAA-approved, FAA-certified, or OEM-approved aircraft component. As with any 3D-printed accessory, minor cosmetic variation in the print surface is normal. The aircraft owner/operator and pilot in command are responsible for determining suitability for their aircraft and operation.
Aftermarket accessory. Cirrus3DPrints does not represent this product as an FAA-approved, FAA-certified, PMA-approved, STC-approved, TSO-approved, or OEM-approved aircraft component. Aircraft compatibility does not constitute approval by Cirrus Aircraft.
The aircraft owner/operator and pilot in command are responsible for determining suitability for their aircraft and operation, and for proper mounting, fitment, inspection, maintenance, and use.
Purchase and use are subject to our Terms of Sale & Product Use, including the full accessory disclaimer, assumption of risk, warranty disclaimers, and limitations of liability.
